Sandwich panel SP2E X-PIRS
Sandwich panel SP2E X-PIRS is available in thicknesses 120 - 160 mm.
Low U-value and proper joint design together with wide thickness range make this sandwich panel an ideal solution for cold storage buildings. Innovative technology increasing strength parameters of the panel provides for load-bearing capacity up to 40% higher comparing to standard solutions.
The core of this sandwich panel is made of rigid, HCFC-free, self-extinguishing and sustainable polyisocyanurate foam (PIR). Its excellent thermal insulation properties enable the decrease of panel thickness which transfers directly to lower transportation and assembly costs, as well as significant savings of building's life cycle costs.
- External walls
- Internal walls
|Thickness D (mm)||120||140||160|
|Sound insulation Rw (dB)||24||24||24|
|Reaction to fire||B-s1, d0||B-s1, d0||B-s1, d0|
|Wall fire resistance values & max span horizontal / vertical orientation (m):||120||140||160|
|EI 15||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5|
|EI 30||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5|
|EW30||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5|
|Ceiling fire resistance values & maximum span lengths (m): stitched joint on upper facing||120||140||160|
|EI 15 (inside)||2.0||2.0||2.0|
|EI 30 (inside)||2.0||2.0||2.0|
All properties are declared in accordance with EN 14509 and related standards.
Coatings and colors
|Facing||Coating||Corrosivity category||UV resistance||Colours|
|External||GreenCoat HIARC MAX||C4||Ruv4||RAL7035, RAL9006 (RR40), RAL9007 (RR41)|
|External||Polyester||C3||Ruv2-3||RAL1015, RAL3013, RAL5005, RAL6011, RAL7015 (RR23), RAL7016 (RR288), RAL7035, RAL9002, RAL9006, RAL9007, RAL9010|
|Internal||PVC laminate *||C4||-||White|
UV resistance describes how well the coating is able to keep its original colour and gloss levels in accordance with EN10169. The higher the class, the better the resistance.
Corrosivity categories describe the outdoor climate conditions in accordance with EN12944. The higher the category, the more corrosive environment.
Read more about UV-resistance and corrosivity categories.
|Modular width||Facing||Profile options|
|1100mm||External||L, L25, M|
|1000mm||External||L, L25, M|
To make both architectural and structural design work easier, with accurate product information in 3D form, we offer a selection of CAD / BIM -objects for Autodesk Revit and ArchiCAD.
Traypan® software for designing sandwich panels
With TrayPan®, you can design metal faced sandwich panels made by Ruukki. A panel structure can be designed as a single- or multi-span construction. You can easily give, with a few parameters, both suction and pressure loads caused by the wind. The application also calculates the necessary fasteners.Go to Traypan®