Sandwich panel SPB WE
Sandwich panel SPB WE is available in thicknesses 80 - 230 mm.
It is a perfect solution for most buildings and structures, combining high quality with very good technical properties.
The filling consisting of non-combustible and environmentally friendly soft mineral wool with low thermal conductivity coefficient ensures very good thermal insulation of this panel. Properly milled core increases air-tightness and provides high sound insulation.
- External walls
- Internal walls
|Thickness D (mm)||80||100||120||140||150||160||170||180||200||230|
|Sound insulation Rw (dB)||29||29||29||29||29||29||29||29||29||29|
|Reaction to fire||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0||A2-s1, d0|
|Wall fire resistance values & max span horizontal / vertical orientation (m):||80||100||120||140||150||160||170||180||200||230|
|EI 30||-||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5|
|EI 60||-||-||6.0 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5||7.5 / 7.5|
All properties are declared in accordance with EN 14509 and related standards.
Coatings and colors
|Facing||Coating||Corrosivity category||UV resistance||Colours|
|External||GreenCoat HIARC MAX||C4||Ruv4||RAL7035, RAL9006, RAL9007|
|External||Polyester||C3||Ruv2-3||RAL1015, RAL5005, RAL7015, RAL7016, RAL7035, RAL9002, RAL9006, RAL9007, RAL9010|
Corrosivity categories describe the outdoor climate conditions in accordance with EN12944. The higher the category, the more corrosive environment.
Read more about UV-resistance and corrosivity categories.
|Modular width||Facing||Profile options|
|1100mm||External||L, M, R275, R550, F|
|Internal||L, L25, F|
|1000mm||External||L, M, R28, R250, R500, F|
|Internal||L, L25, F|
To make both architectural and structural design work easier, with accurate product information in 3D form, we offer a selection of CAD / BIM -objects for Autodesk Revit and ArchiCAD.
Traypan® software for designing sandwich panels
With TrayPan®, you can design metal faced sandwich panels made by Ruukki. A panel structure can be designed as a single- or multi-span construction. You can easily give, with a few parameters, both suction and pressure loads caused by the wind. The application also calculates the necessary fasteners.Go to Traypan®