.tmb-250x190.jpg?sfvrsn=607438b5_1)
Design Panel DP V3
Design Panel V3 is suitable for vertical installation. This panel enables the design of facades with curved geometry. Its minimal bending radius is 800 mm. Depending on the thickness, the panel is available with PIR or mineral wool core.
The information on our website is accurate to the best of our knowledge and understanding. Although every effort has been made to ensure accuracy, the company cannot accept any responsibility for any direct or indirect damages resulting from possible errors or incorrect application of the information of this publication. We reserve the right to make changes.
Properties
Available dimensions
| Panel thickness (mm) | Max length L (mm) | Min radius R (mm) |
| 80, 100, 110, 120, 140, 150 | 6000 | 800 |
Thicknesses and core types available for Design Panel DP V3
| Thickness(mm) | Core type | DP V3 |
| 60 | PIR | - |
| 80 | PIR | SP2B, SP2D |
| 100 | PIR | SP2B, SP2D |
| 110 | PIR | SP2B |
| 120 | PIR | SP2D, SP2E |
| 140 | PIR | - |
| 160 | PIR | - |
| 80 | mineral wool | nSPB |
| 100 | mineral wool | nSPB, nSPD |
| 110 | mineral wool | nSPB |
| 120 | mineral wool | nSPB, nSPD |
| 140 | mineral wool | nSPB |
| 150 | mineral wool | nSPB, nSPD |
| 160 | mineral wool | - |
| 170 | mineral wool | - |
| 180 | mineral wool | - |
| 200 | mineral wool | - |
| 210 | mineral wool | - |
| 230 | mineral wool | - |
Coatings, profiling and colors
Vertical corner panels Design Panels V3 can be manufactured with different coatings, profile options and colors. The availability of specific features is compliant with the options existing for corresponding standard panels. NOTE: L25 is not available on internal face.
