Kandev profiilplekk T70-57L-1058

Kandvad profiilplekid sobivad nii katusekatteks kui ka katuse- ning vahelagede ehitamiseks, samuti saab neid kasutada raketisena betoonitöödel. Kõige ökonoomsema lahenduse aitab teil alati leida meie dimensioneerimismisprogramm POIMU.

Nutika tehnoloogia saab lisada kõigile Ruukki kandvatele katuseprofiilidele. Uus Ruukki® katuseandurisüsteem jälgib katuste lumekoormust reaalajas, ennetab ohtlikke olukordi ja vähendab kulusid, muutes lume eemaldamise nutikamaks. Nutikatuste eeliste kohta saate siit rohkem lugeda.
 

Kasutuskohad:

  • tööstushooned
  • ühiskondlikud hooned
  • spordirajatised
  • äri- ja büroohooned
  • renoveerimistööd
  • põllumajandushooned

     

  • Ruukki veebilehel olev sisu on hoolikalt kontrollitud. Ruukki ei võta endale siiski mingisugust vastutust võmalike vigade ega käesolevas veebilehe väljavõttes olevate andmete valest kasutamisest põhjustatud otsese või kaudse kahju eest. Tootja jätab endale õiguse teha muudatusi. Ajakohase info leidmiseks külastage www.ruukki.ee.

    Üldandmed

     

     

     

    Toode
    Kandev profiilplekk T70-57L-1058
    Tootekood
    T70-57L-1058
    Height
    70 mm
    Lainepõhi
    57 mm
    Lainehari
    65 mm
    Kasulik laius
    1057.5 mm
    Miinimumpikkus
    600 mm
    Maksimumpikkus
    15 000 mm
    Tüüpiline sildeava
    <5 m
    Kvaliteedikontroll
    Tehase toodangu kontroll vastavalt standarditele EN 1090-1 ja EN 1090-4
    Tolerantsid
    Dimensions and shape according to EN 1090-4, material thickness according to EN 10143
    CE-märgistus
    Vastavalt EN1090-1
    Teostusklass
    EXC1, EXC2, EXC3

    Tooraine

    Tooraine

    Materjali paksus (mm) Terase mark Tsink (g/m2) Pinnakate Korrosiooniklass, sisemine Korrosiooniklass, välimine Värvused Kaal (kg/m2)
    0.7 S350 Z275 Tsink C2 - 7.79
    0.7 S350 Z100 Polüester 15 C2 - RR20  7.79
    0.7 S350 Z275 Polüester 25 C3 C3  RR20 7.79
    0.8 S350 Z275 Tsink C2 - 8.90
    0.8 S350 Z100 Polüester 15 C2 - RR20  8.90
    0.8  S350  Z275  Polüester 25  C3  C3  RR33  8.90 
    0.9 S350 Z275 Tsink C2 - 10.02
    0.9 S350 Z100 Polüester  15 C2 - RR20 10.02
    1.0  S350  Z275  Tsink C2  - 11.13 
    1.0  S350  Z100  Polüester 15  C2  - RR20  11.13 
    1.0  S350  Z275   Polüester 25  C3  C3 RR20, RR33  11.13 
    1.0  S350  Z275   Pural  C4  RR23  11.13 

     

     

    Korrosioonikaitse

    Keskkond Pinnakate
    Sisekeskkond, mille korrosiooniklass on C1, C2 standardi EN ISO 12944-2 kohaselt ja A1, A2 standardi EN 10169 kohaselt Teraslehed tsinkkattega 275 g/m2 või 100g/m2 ja polüesterkattega SP 15, mille paksus on 15 μm
    Sisekeskkond , mille korrosiooniklass C1, C2, C3 standardi EN ISO 12944-2 kohaselt ja A1, A2, A3 standardi EN 10169 kohaselt Teraslehed tsinkkattega 275 g/m2 ja polüesterkattega SP 25, mille paksus on 25 μm



    Projekteerimistarkvara

    Poimu-logo

    Dimensioneerimistarkvara Poimu®

    Ruukki pakub suurepärast dimensioneermistarkvara Poimu®, mis võimaldab kandvate profiilide tootevaliku optimeerimist Eurocode’i kohaselt. Vaid mõnede alusandmete sisestamisel saab kasutaja valida Ruukki valikust sobiva kandva profiilpleki. Kiiroptimeerimistööriist pakub lahendusi ühe, kahe ja mitme avalistele konstruktsioonidele. See annab täpse lahenduse, millist ja mis mõõtudega profiili tuleks kasutada.

    Laadige alla Poimu®

    Perforatsioon

    Standardselt perforeeritakse profiili seinad 15% tihedusega. Perforatsiooni muster on kolmnurkse paigutusega ning perforatsiooni ava diameeter on 3mm sammuga 7,4mm.

    Load-bearing-sheet-perforation
    Perforatsiooni muster RV 3.0 - 7.4; perforatsiooni tihedus 15%, perforeeritava ala mahus
     

    Corrosion resistance

    Perforated trapezoidal profiles ought to be applied in accordance with technical specifications draw up to comply with obligatory standards, building regulations and assembly instructions.

    Due to requirement regarding corrosion resistance perforated steel sheets may be applied only indoors and as follows:
    Galvanized steel sheets with zinc coating 100 g/m2  fand organic coating SP 15 (polyester 15 µm) or Galvanized steel sheets with zinc coating 275 g/m2  fand organic coating SP 25 (polyester 25 µm) - in corroding medium C1 and C2 as per EN ISO 12944.

    Load bearing profile application

    Load bearing profiles are usually applied in multi layer roofing constructions. Web perforation leads to decreased strength parameters in the case of load bearing trapezoidal sheets. Use of Poimu software is recommended when determining the load capacity of perforated profiles: this software enables trapezoidal sheets within a structure to be dimensioned and optimized. For more information on Poimu visit software center and download Poimu.

    Sound absorption is similar to all profiles. However, small differences in sound insulation may occur dependent on profile height.

    Low profile application

    Acoustic profiled sheets have their whole surface perforated uniformly and are applied as interior facings of multi layer wall constructions and ceilings. They are characterized by a high sound insulation coefficient (150 - 4000 Hz). Application of perforated trapezoidal profiles results in improved acoustic conditions in such buildings as canteens and sports or production halls. Regulation of reverberation time is also possible through application of an appropriate quantity of perforated sheets in ration to non-perforated sheets.

    Acoustic absorption coefficient, absorption class

    Acoustic absorption coefficient αs was determined on the basis of ISO 354:2003. Absorption class was determined on the basis of EN 11654:1997.

    Tables 1 - 3 present acoustic absorption coefficients and absorption class for the relevant trapezoidal profiles and a construction corresponding to them. Specimens are names according to trapezoidal profile.

    Table 1. Absorption coefficient and class for construction

    Absorption coefficient at octave bands
     
    Specimen 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz Absorption class

    T20
    - vapour barrier
    - rock wool 100mm -100kg/m3

    0.22 0.70 0.89 0.85 0.79 0.45 0.18 D
    T45
    - vapour barrier
    - rock wool 100mm -100kg/m3
    0.25 0.73 0.93 0.89 0.84 0.48 0.18 D
    T130
    - vapour barrier
    - rock wool 100mm -100kg/m3
    0.29 0.85 0.98 0.86 0.35 0.21 0.09 E
    T153
    - vapour barrier
    - rock wool 100mm -100kg/m3
    0.28 0.83 0.97 0.85 0.41 0.22 0.08 E

    Table 2. Absorption coefficient and class for construction

    Absorption coefficient at octave bands
     
    Specimen 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz Absorption class

    T20
    - rock wool 100mm -100kg/m3

    0.18 0.74 0.94 0.92 0.93 0.94 0.82 A
    T20
    - sound absorbing mat 120g/m3
    - vapour barrier
    - rock wool 100mm -100kg/m3
    0.20  0.63  0.82  0.84  0.88  0.70  0.46 
    T153
    - rock wool 100mm -100kg/m3 
    0.23  0.63 0.82  0.84  0.88  0.70  0.46  C
    T153
    - sound absorbing mat 120g/m3
    - vapour barrier
    - rock wool 100mm -100kg/m3
    0.24 0.80 0.97 0.86 0.49 0.30 0.20 D
    T153
    - sound absorbing mat 120g/m3
    - sound absorbing mat 120g/m3
    - vapour barrier
    - EPS 60S Roof 100mm 
    0.05  0.20  0.54  0.79  0.44  0.31  0.24 

    Table 3. Absorption coefficient and class for construction

    Absorption coefficient at octave bands
     
    Specimen 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz Absorption class
    T153
    - rock wool 50mm-150kg/m3
    - vapour barrier
    - rock wool 50mm -110kg/m3
    0.20 0.69 0.79 0.77 0.45 0.29 0.26 D

    Material characteristics for specimen layers

    • Ruukki trapezoidal profile
    • Vapour barrier (0.25mm, 170g/m2)
    • Mineral wool - description given for every specimen in the tables
    • EPS 60S Roof (15kg/m3)

    Roof sensor

    Ruukki® Roof Sensor lahendus

    The purpose and aim of the Ruukki® Roof Sensor System is to measure and visualize the snow load on roofs constructed with Ruukki load bearing sheets. The system provides valuable information for safety and management decisions concerning the building. It’s accessory for all Ruukki load bearing sheets and is available for new and old roofs that have access to the lower surface of the sheeting. The system is easy to install and use and there is no need for further monthly service fees. 

    Following corner stones are needed in the system 

    1. In structural design, Ruukki’s POIMU roof dimensioning program must be used
    2. Ruukki Roof Sensors location must be defined by the structural designer and sensors appropriately fitted by the installer
    3. The parameters needed in system configuration are defined in POIMU program
    After the sensors installation and system configuration, the system gives warnings when designers defined characteristic snow load level have been reached. Further warnings will be given well before load bearing sheeting is approaching its ultimate capacity. Warnings are given by visual light on the roof level and through user interface in web pages in a local network.

    Dokumendid

    Tehniline dokumentatsioon

    Leidke siit Ruukki kandvate profiilplekkidega seotud dokumendid. Dokumendid on organiseeritud dokumendi tüübi alusel. Vajutades lingile liigute edasi dokumendikogusse.

    Sertifikaadid

    Leidke siit Ruukki kandvate profiilplekkidega seotud sertifikaadid ja muud dokumendid. Dokumendid on organiseeritud dokumendi tüübi alusel. Vajutades lingile liigute edasi dokumendikogusse.